Featured Slider

7 Steps to Clean Your Personal Life Jacket

People need life jackets in order to protect them from hazards. When you're out on the water, you must make sure you're safe. Putting a life jacket lets you stay safe under many different kinds of conditions. If you're suddenly thrown overboard in rough seas, the life jacket will help you avoid sinking. A life jacket also makes sure you're okay when you're enjoying a day at the beach. Should a sudden wave come along, the jacket will make sure you can bob right up again.
People who like to spend lots of time on the water should do all they can to keep their personal life jacket in good shape. One of the best ways to keep your great water skiers Connection life jackets is by making sure it's cleaned. Keeping it clean will make sure you enjoy years of safe use when you're having fun on the water.

The Right Space For Cleaning

Begin by placing your jacket in a space that lets you get access to all areas of the jacket at the same time. A deck is an ideal space as it has enough space but can be washed with ease once you're done. This will allow the water to run off as you begin the process. Remove anything from the deck that you don't want to get wet. If you have several life jackets, you can wash them all off in a single space at the same time. This is a good way to keep each jacket that you use for all members of your family in good condition.

Bring Out a Hose

The next step is using a hose. A hose will make sure each part of the jacket gets completely wet. This way, the dirt can be removed. Use a hose with a nozzle that you can control. It should not spray to hard as this can possibly harm the fabric of the jacket. A good steady stream of water will do the job nicely and help you make sure the jacket get clean.

Water and Detergent

You'll need a bucket and some mild detergent. If you're only cleaning a single jacket, a small amount diluted into a large bucket should do it. You can add more if you have more jackets or you're facing stubborn stains that have been in place for some time. Your goal is to have a bucket full of soapy water that will remove all the dirt and any lingering grime. You also want to make sure the detergent won't harm the materials in the jacket such as nylon. A jacket may have areas that are designed to be inflated. These are areas that require even more care in order to get clean. Dip the jacket in the bucket.  If you are unsure on what detergent to use visit Amazon detergent sheet to learn more.

Brush It

Once you've completely dipped the jacket in the bucket, you can bring it out and begin the further process of cleaning it. You'll want to scrub away any mildew you see with a coarse brush. The rest of the jacket should be examined carefully to see exactly where all stains lie. You're going to want to take the straps out from and bring them away from the body of the jacket. You want to make sure you're getting out all dirt from this area. This way, it doesn't impede the function of the jacket. Now is also the right time to look at all areas of the life jacket. You want to make sure it's in good working order. If you see anything that might be amiss, now is the time to get it corrected. You want to make those repairs before you put in on again. As long as you properly repair any minor rips or other issues, the well-constructed life jacket should be yours to use for many years.

Dunk and Wash

After you've removed all the stains that you see with careful brushing, it's time to dunk the life jacket in the water again. The soap will remove any issues that can be caused when the jacket remains in the water for a long time. Sea salt and other materials found in waterways can build up on the surface of the life jacket. Even if the jacket is just lying on the boat, the salt air can take a toll. Placing the jacket in a solution of water and detergent is enough to get rid of this material and keep it in good working order again once you're done.

Wash Off the Soap

Take the house and aim it at the jacket once you've finished cleaning it in the bucket. Keep the hose on for at least a minute. This should be enough to fully remove the remaining detergent. You'll want to direct the hose at each area of the jacket in turn. Start with the top of the jacket and then work your way down. Turn the life jacket around. This way you can get at the back of it and continue to remove all traces of any detergent. Detergents need to be fully removed from the life jacket in order to make sure the life jacket does not have any soap. The soap can otherwise make it hard for the jacket to fit properly and for you to use it in the event of an emergency.

Let it Dry

The last step is to let your jacket dry. Remove it a clean, dry place. A corner of your deck that gets some sun to help speed up the drying process is a good choice. It should be well ventilated. This helps bring in breezes that can further speed up the drying and make it possible for you to get on the ocean safely again. Make sure the entire jacket has been fully dried. Inspect each part after you're done with cleaning and drying. Do not put the life jacket or use it until it is no longer damp.

No comments

We love hearing from you! Thanks for leaving us some comment love! If you're a new follower, please leave your link, so we can follow you back!

Sleep Tight with Sweet Night!

New Year Sale - Up to 40% OFF