Guide on Staining Wood for DIYer

Understanding "How To Stain Wood" is the fundamental home improvement skill which
everyone should learn. No matter if you're repairing the old wooden floors, making fine
furniture or DIY shelves it is an excellent talent to learn wood staining easily.

Most possibly you want to stain wood for your outdoor DIY projects (windows, deck,
trim, frame) or indoor wood working (table, shelf and so on). If you know wood staining
properly then accomplish such wood working projects will be a simple task to you.

You will find some ideas you should comprehend that will make your wood staining
projects significantly less annoying and provide much better outcomes so that is what I
will discuss now.

So, scroll below to get a stage-by-stage guide that will help you to a great extent.

Before we start, here are what you will need:

Wood-stain (your range of color)
Exterior-level finishing coat
Pre-stain wood-conditioner
Vinegar-based cleaner
Smoot staining brush
A few rubbing cloths
Sandpaper
Water

Here’s the process you’d have to follow to stain wood:

Setup:

To stay away from getting stain on wood, you should definitely use the painter’s tape for keeping
clean lines. Eliminate hardware and some other removable pieces which are on surfaces you're
planning to stain.

Clean:

Apply a pre-mixed vinegar-centered cleaning solution for washing the wood, rub from a number
of different directions. In case streaks remain soon after rubbing, then rinse with the clean water.

Preparation:

Prepare wood surfaces through sanding lightly with grain of wood.

Pre-stain:

Make use of a top quality "pre-stain" conditioner for wood to decrease the chance of an uneven
or blotchy-looking finish.

Seek advice from your paint expert to suggest a pre-stain conditioner for woodworking. Use the
"pre-stain conditioner" as outlined by the instructions of the manufacturer.

Stain:

Evenly use your "stain based" on stain manufacturers’ suggestion. Multiple coats can be needed
to get the desired color. For outdoor projects, be sure using exterior stains. Have a peek at
SimplyHomeTips to learn more about exterior wood stains.

Finish:

Finally, finish by using a proper amount of the finish coat according to the instructions of the
manufacturer. Multiple coats can be required to get the desired performance and look.

Stain Wood By Wood Types:

To start with, you need to determine the type of the wood you're working with. In case
you are not certain, then here are a few guidelines that will help differentiate between
the 2 fundamental types:

Hardwood:

Oak, beech, walnut, birch, elm, and ash are all the traditional hardwoods. Boxwood and
Aspen are also integrated in this type though they're soft relatively.

Softwood:

This comprises cedar, pine and most of the fruit woods. Also, fir is regarded as
softwood, although it is the toughest in this type. "Blotchy patterns" as well as an
"uneven wood-grain" are the characteristics of softwood types.

To conclude, I must say that if you follow the steps mentioned in this post will help you
get the work done professionally. At the same time, you should stick to the
manufacturer’s instruction.